30MF Class Up Armor Rosan Paladin：裝甲替換教學
By Hobby Gundam USA: Gunpla & Gundam Model Kits | Fast ... | Published: 2026-10-31
Category: 操作指南
了解如何輕鬆將 30MF Class Up Armor 安裝到您的 Rosan Paladin 上。依照這些步驟，即可獲得乾淨的貼合效果，並讓您的奇幻模型套件升級更顯俐落。
Quick answer
To swap the 30MF Class Up Armor onto your Rosan Paladin, disassemble the figure at the armor seams, test-fit each new piece before snapping it down, and keep the original parts bagged for future builds. Work slowly and check joints after every piece.
Why test-fit before you snap
The 30MF Class Up Armor is an expansion set designed to add detail and presence to your Rosan Paladin. Because it is an accessory set rather than a full replacement, the fit depends on how your base kit is assembled. Test-fitting each piece without fully pressing it into place lets you feel for resistance before committing. If a piece feels tight, stop and check the orientation rather than forcing it.
When to skip the swap
If you have already painted or top-coated your Rosan Paladin, armor swapping can scratch finish at contact points. Consider masking the joints or postponing the swap until after you have finalized the look. The Class Up Armor is also not a structural upgrade; it changes appearance, not articulation or stability.
Step-by-step armor swap
- Disassemble at the armor seams: Remove the existing armor pieces from the Rosan Paladin by gently pulling at the seams. Start with the shoulders and skirt, then work outward. Common mistake: twisting pieces instead of pulling straight out, which can stress the pegs. Keep a small tray for loose parts so nothing rolls away.
- Test-fit each new piece: Before snapping any Class Up Armor piece into place, set it on the figure and check alignment. The armor should sit flush without gaps. Common mistake: forcing a piece that is upside down or on the wrong side. If it does not sit flat, re-check the orientation before applying pressure.
- Snap and check joints: Once aligned, press firmly but gently until the piece clicks or seats. After each piece, move the nearby joint through its range to confirm the armor does not block movement. Common mistake: adding all armor before testing, which makes it harder to isolate a tight fit. Test articulation after every piece, not just at the end.
- Store original parts: Bag the removed Rosan Paladin armor pieces and label them. You may want to revert the look later or use them on another build. Common mistake: mixing original and Class Up parts in one pile, which slows down future swaps. A small zip bag per kit keeps parts sorted.
Product facts
- 30MF CLASS UP ARMOR (ROSAN PALADIN): Official Bandai Hobby accessory set for the 30MF Rosan Paladin. Because it is made for that specific kit, you can expect the armor pieces to align with the Rosan Paladin's proportions without custom modification.
30MF CLASS UP ARMOR (ROSAN PALADIN)
