PM Perching Figure Care: Yotsuba Nakano and Alina Clover

By Hobby Gundam USA: Gunpla & Gundam Model Kits | Fast ... | Published: 2026-10-31

Category: Tips & Care

Keep your SEGA PM Perching figures looking sharp with a simple cleaning and display routine for Yotsuba Nakano and Alina Clover.

Quick answer

Clean your PM Perching figures gently with a soft brush and mild soapy water, dry them fully, and display them away from direct sun and heat. Handle Yotsuba Nakano and Alina Clover by their bases to avoid paint wear.

Why perching figures need a lighter touch

PM Perching figures are designed to sit or lean on edges, so their contact points and small details are more exposed than a standard standing figure. That makes dust buildup and accidental knocks more likely, especially if you move them often.

SEGA's PM line is a prize figure category, which means these are affordable collectibles rather than high-end resin pieces. They still deserve careful handling, but you do not need specialist conservation supplies to keep them looking good.

Display spots that protect the pose

A stable shelf with a slight lip or a dedicated figure stand reduces the risk of a perching figure tipping over. Avoid placing them on top of monitors or speakers where vibration and heat can loosen joints or warp softer plastic over time.

Keep them out of direct sunlight. UV exposure fades paint, and the effect is cumulative, so a spot that looks fine for a month can still cause noticeable dulling after a year.

When to skip water entirely

If your figure has a matte finish or you are unsure about a painted detail, start with dry cleaning only. Water and soap are safe for most PVC figures, but repeated wet cleaning on delicate paint can dull the surface, so reserve washing for stubborn grime.

Step-by-step PM Perching figure care

Set up a clean, dry workspace: Lay a soft microfiber cloth on a flat surface and keep a can of compressed air or a soft brush nearby. Work away from direct sunlight so you can see dust clearly without glare. Never clean over a hard floor; a dropped figure can lose a small part.
Dust first with air or a soft brush: Use short bursts of compressed air held at least 10 cm away, or a clean makeup brush, to lift dust from hair and clothing folds. Work from top to bottom so debris does not settle back onto cleaned areas. Skip household paper towels; their fibers can scratch painted surfaces.
Spot-clean with mild soapy water: Mix a drop of mild dish soap in a cup of lukewarm water. Dip a microfiber cloth or cotton swab, wring it nearly dry, and gently wipe only the soiled area. Do not submerge the figure or scrub painted details. If you are unsure about a painted area, test on the base first.
Rinse and dry completely: Wipe away soap residue with a cloth dampened with plain water, then pat dry with a dry microfiber cloth. Let the figure air-dry in a shaded spot for at least an hour before putting it back on display. Trapped moisture in joints can cloud clear parts or loosen glue over time.
Check the base and contact points: Inspect the base and any pegs for cracks or looseness. If the figure wobbles, add a small piece of museum putty under the base rather than bending the figure to fit. A stable base prevents the slow lean that can permanently warp a perching pose.
Return to a protected display spot: Place the figure on a shelf away from direct sun, heat vents, and high-traffic areas. Rotate your display every few months so no single figure sits in the same light exposure indefinitely. Keep the original box if you have space; it is the safest way to store the figure if you pack it away.

Product facts

"The Quintessential Quintuplets Specials" PM Perching Figure "Yotsuba Nakano": SEGA PM Perching Figure of Yotsuba Nakano from The Quintessential Quintuplets Specials. Its perching pose means the base and contact points need extra stability on your shelf.
"The Quintessential Quintuplets Specials" PM Perching Figure "Yotsuba Nakano"
"I May Be a Guild Receptionist, but I'll Solo Any Boss to Clock Out on Time" PM Perching Figure "Alina Clover": SEGA PM Perching Figure of Alina Clover from I May Be a Guild Receptionist, but I'll Solo Any Boss to Clock Out on Time. The character's determined pose can make the figure front-heavy, so check balance before displaying.
"I May Be a Guild Receptionist, but I'll Solo Any Boss to Clock Out on Time" PM Perching Figure "Alina Clover"