Build the 30MP NIJIKA IJICHI Model Kit

Quick Answer

Assemble the 30MP NIJIKA IJICHI model kit by following the snap-fit steps below, focusing on part cleanup and careful alignment for a seamless finish.

Step-by-Step Assembly Guide

1. Prepare Your Workspace and Tools: Clear a flat surface with good lighting. Gather side cutters, a hobby knife, and a fine file or sandpaper. Check the instruction sheet for part numbers and layout. Always cut parts away from the runner using flush cutters, then trim the nub with a knife or sandpaper for a clean finish.
2. Remove and Clean Each Part: Use side cutters to snip each part from the runner, leaving a small nub. Trim the nub with a hobby knife, then sand smooth if needed. Keep parts organized by runner letter. Sand in one direction to avoid scratching the plastic; test fit before final assembly.
3. Assemble the Torso and Head: Snap the torso halves together, ensuring the pegs align fully. Attach the head, pressing firmly but gently to avoid stress marks. Check that the neck joint moves freely. If a peg feels too tight, lightly sand it rather than forcing it—this prevents cracking.
4. Build the Arms and Legs: Assemble each limb by snapping the inner and outer halves, then attach the hands and feet. For joints, rotate them slowly to confirm full range of motion. Apply a tiny drop of plastic-safe lubricant to tight joints if needed, but test on a hidden area first.
5. Apply Decals and Final Details: Use the included decals or stickers as shown in the instructions. For dry-transfer decals, rub firmly with a soft pencil. Seal with a clear coat if desired. Wet the area with a drop of water before placing a decal—this lets you slide it into the exact position.

Product Facts

• 30MP NIJIKA IJICHI: This Bandai Hobby kit is part of the 30MP line and designed for straightforward building with quality parts. You can expect a precise fit and minimal flash, which saves time on trimming and lets you focus on assembly technique.