30MS Option Parts Set 26 Climb Unit: Customizing Your Kit

By Hobby Gundam USA: Gunpla & Gundam Model Kits | Fast ... | Published: 2026-10-31

Category: How-to Guides

Learn how to use the 30MS Option Parts Set 26 Climb Unit in Color C to add climbing-themed detail to your 30MS figure. Follow our step-by-step guide for a clean, sturdy build.

Quick answer

To customize your 30MS figure with Option Parts Set 26 (Climb Unit) in Color C, first test-fit the parts on your figure, then attach them securely and adjust poses to integrate the climbing theme. Follow the steps below for a clean, sturdy build.

Why the Climb Unit is a smart upgrade for 30MS figures

The Climb Unit adds a distinctive climbing motif to your 30MS figure, making it stand out on the shelf. Because it's an official Bandai Hobby product designed for the 30MS series, compatibility is assured. Color C offers a specific color that may complement or contrast with your figure's existing palette, so consider how it fits your overall customization ideas.

What to check before you start

This is a model kit accessory that requires assembly; tools and paint are not included. Make sure you have basic modeling tools like nippers and a hobby knife on hand. Also, since the set is an option parts kit, it may not include a full figure—check that you have a compatible 30MS figure ready to customize.

Step-by-step: Customizing with the Climb Unit

Prepare your tools and workspace: Clear a well-lit area and gather nippers, a hobby knife, and sanding tools. Common mistake: using dull nippers can cause stress marks on the plastic. Check that your nippers are sharp before cutting.
Separate the climb unit parts from the runner: Carefully cut the parts from the runner, leaving a small nub. Then trim and sand the nub flush. Common mistake: cutting too close can damage the part; always leave a bit and sand down. Sand in one direction to avoid scratching the surface.
Test-fit the parts on your 30MS figure: Before final assembly, dry-fit the climb unit parts onto your figure to check compatibility and plan the pose. Common mistake: forcing parts can break pegs; if it doesn't fit, check for flashing or incorrect orientation. If a part feels tight, gently sand the peg rather than forcing it.
Attach the climb unit securely: Once satisfied with the fit, press the parts into place. Some parts may require polycaps or joints; ensure they are seated properly. Common mistake: not pushing joints all the way in, leading to loose parts. Listen for a soft click or feel for a firm stop to confirm connection.
Adjust the pose and integrate with your figure: Pose your figure to highlight the climbing theme, using the unit's articulation if available. Check for balance and stability. Common mistake: over-rotating joints can cause stress; move them gently. Test the pose from multiple angles to ensure it looks natural.

Product facts

30MS OPTION PARTS SET 26 (CLIMB UNIT) [COLOR C]: This 30MS Option Parts Set 26 (Climb Unit) in Color C is a Bandai Hobby model kit accessory designed to expand your 30MS figure possibilities. It's an official expansion pack that adds new customization options to your existing 30MS kits.
30MS OPTION PARTS SET 26 (CLIMB UNIT) [COLOR C]
30MS OPTION PARTS SET 26 (CLIMB UNIT) [COLOR C]: Includes parts for a climb unit in Color C. The specific color allows you to coordinate or contrast with your figure's color scheme for a unique look.
30MS OPTION PARTS SET 26 (CLIMB UNIT) [COLOR C]: Compatible with 30MS figures for customization. You can use it with any 30MS figure, making it a versatile addition to your collection.